Agriculture & Seed Technology

Home Agriculture & Seed Technology

1. BDI-50 Hot Air Universal Oven (Memmert Type) (Three side heating elements)
Standard double wall fabrication, inner chamber made of richly anodized aluminium or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in white stoving enamel / powder coated paint with mat finished colour combinations.
Kanthal wire heating elements provided on three sides to attain quick and uniform heating C ± 2⁰ C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power thermostat control Knob and indicators for mains & thermostat.

Facility to programme different temperature level for different time interval and programme locking facility.

Electronic : Micro controlled based digital display of temperature.

Alarm : Audio visual alarm for temperature deviation.

Display : 2x16 character LCD display with backlit.

Chamber Size HWD (min)	30x30x30cm
No. of shelves	2
Capacity (min)	28 Ltrs.
Temperature range	Ambient to 250^o C ± 2^o C
Electronics	Micro controller based digital display of temperature
Alarm	Audio visual alarm for temperature deviation.
Display	2x16 character, LCD display with back lit
Operating voltage	220-230 V, AC 50 Hz. Single phase.

2. BDI - A3 Seed Divider (Gamet Type)

Size : 38 cm X 31 cm X 51 cm (H X W X D) (Approx.)

Hopper capacity : 2 Kg (Approx.)

Electronic motor : 0.5 H.P (Minimum) Single phase

Material steel : Body is made of Mild steel or Stainless steel.

Principle : Centrifugal Action, Motor Driven.

3. BDI-A5 Seed Grinder

Function : Grinding the seed in determination of moisture meter.

Grinding chamber size : 75 x 25 mm

Material : All contact parts are made of stainless steel 304 grade.

Motor : 0.5 H.P.

Capacity : 5 gm-250 gms

Voltage : 220-240 AC, 50 Hz

Adjustable so as to obtain different size of particles, at least 50% of ground material to pass through a wire sieve with meshes 0.50 mm and not more than 10% remain on a wire sieve with meshes of 1.00 mm.

4. BDI-A2 Seed Blower (Dacota type)
Seed blower must be makes the separation by accurately controlling the upward air flow through a transparent plastic column for purity testing, docking and cleaning o f the grain/seed samples. Time can be controlled either by means of a timer or manually. The air flow can be precisely controlled to obtain even the most difficult sensitive air separations. Columns are built to trap lightweight seed and chaff; only pure seed remains at the bottom of the column. It has a wire mesh bottom to prevent seed from falling into the fan. All the controls are mounted on the top panel including the timer for easy access. It has three sizes of columns for covering the entire range of seeds/grains. Balanced suitable blower fitted on the table, which is made of seasoned woods and fitted with caster wheels for portability.

Size : 48 x 56 x 86 cm. (approx.) w/o tubes
Operating Voltage : 220V, 50 Hz, AC.

Small tube Set : Recommended for Brome, red top, Blue Grass, Legumes, small cereal grains etc.

Size : 7.6cm dia x 93 cm length (approx.) and 4.5 cm dia x 93 cm Length (approx).

Large tube set : Recommended for large capacities and for grain grain, grasses, legumes, corn, soyabean etc.

Size : 10 cm dia x 93 cm height (approx.).

5. BD-09 Binocular Stereoscopic Microscope
Flat sharp image erect and unreserved. Wide Filed Eye Pieces. Para focal from High to low power Quick Changing paired objectives through 90 deg. Rotation. Binocular Tubes inclined at 45 deg. Adjustable interpapillary distance, Binocular head rotation in 360 deg. Smooth Rack and Pinion Focusing slide way Tension Controlled large Knobs. Built in illumination both for incident light and transmitted light Transformer built in base 6V-20W lamps.

Objective : 2X & 4X or 3X & 5X

Eye Pieces : WF 10X

Magnification : 20X to 60X or 30X to 75X.

Optional Accessories

Eye Piece : 15 x WF

Eye Piece : 20 x WF

6. BDI-A9 Seed Trier
The Seed Trier should be capable to take samples from gunny bags of Paddy, Wheat, Maize, Mastered, Onion and many other seeds for test t purpose, It will have facilities to easy penetrate into the bag for collecting samples.

Technical Data

Type : Spear

Length : 470, 610. 760 mm

Inside Diameter : 13 mm

Outside Diameter : 15 mm

Opening for receiving grains : 96 mm

7. BDI-V2 Vacuum Cleaner with Wheels & Castors

Heavy duty vacuum cleaner-

Motor power : 700 w

Air Flow : 1.31 m3/min.

Vacuum : ± 80 m Bar

Capacity of container dry : 5 liter minimum

Power cable length : 5 m. minimum

Power : 220V-50 Hz- 1 ph.

Standard equipped with :

Suction hose 2 m. minimum

Suction pipes

Floor nozzle

8. BDI- P7 Dry-Wet Bulb Thermometer
Plastic body with temperature difference chart to calculate Relative Humidity along with two thermometers setting on plastic body as dry and wet bulb and a piece of cotton cloth and plastic pot with wet bulb thermometer.

Length : 11"13" and width: 3"-4"

Temp range (Indicative) : ± 55⁰ to - 20⁰

Increments -0.50, Accuracy : ± 1 - 20

9. BDI-P8 Hygrometer
Maximum-minimum memory of humidity and Temperature setting to facilitate hourly/daily/monthly or any specific period.

Digital Display

Temp range : 0-50⁰C

Accuracy : ± 1 degree C/1%

Temperature unit F/C selectable

133 mm-150 mm stainless Steel sensor Proof

Protective Plastic cap for Stainless steel sensor with pocket clip

Max/Min Memory recalling

Alarm beeps sound at low or High temp. Limit.

Data Hold/test function selectable

Low battery indicator.

10. BDI-P9 Rain gauge
Rainfall measuring instrument
Constructed from stainless steel, it has a 5-7 inch funnel (detachable), an inner receiving vessel and an outer body all the stainless steel, and a glass/plastic measuring cylinder graduated of 250-500 ml capacity.

11. BDI-56 Orbital Shaker
Should have electronic variable speed control and timer, capable to hold different size of flasks, High shaking frequency, should have universal attachment with 3 clamping rolls. I should be capable to shaking 4 x 500 ml/ 6 x 250 m./ 12 x 100 ml/ 12 x 50 ml flasks.

Shaking motion : Orbital

Orbital dia. : 4 mm

Shaking speed : 90 to 800

Timer : 5 to 50 minutes

Maximum shaking weight : 2.0Kg (permissible)

Input/Output : 45/10 W

Maximum on-time : 100%

Humidity : 80% max

Dimension (WxHxD) : 22-30 x 8-10 x 22-32 cm

Ambient temperature : 5-50⁰C

Power : 220-240 V, 50 Hz

Speed display : Led line

Orbital Shaker supplied with universal attachment, power cable & operation manual.

12. BDI-154 Centrifuge
Bench to centrifuge. Microprocessor controlled, having angle rotor, swing rotors variable speed and timer setting facility by keypad and should be digitally display both Speed and Time. It should have transparent lid. Safety facility-Overheating protection, Lid locking & emergency lid lock release. It should also have Lid opening key for opening lid. Conformity with safety regulations IEC 1010-2-2, DIN norms and EC standard.

Max. Speed : 5000-7000 rpm

Max. RCF : 3,400-4,400

Capacity : 8 x 15 ml, 4 x 50 ml, 4 x 100 ml tubes

Timer : 0 to 99 min, continuous run, short Cycle mode

Immunity : as per EN 50082-1

Radio interference : EN 55011 ISM Class B

Power : 220 to 240 V, 50 Hz, single phase

Centrifuge supplied with Angle rotor and swing rotor for 8 x 15 ml, 4 x 50 ml, 4 x 100 ml tubes. 3 set centrifuge tubes, operation manual in English, power cable sand other standard accessories.